Knowledgebase
K2 Systems Inc. Support > Help Desk K2 Systems > Knowledgebase

Search help:


SmartRG SR501 VDSL setup for Bell or similar internet conection

Solution

Open a web browser and type in http://192.168.1.1/ in the address bar and press Enter.

• Click on Manage gateway (advanced)

• If it prompts you for a username and password, enter admin (all lowercase) for both.

For SR501 be sure that Stinger Mode it is enable on Advance-DSL

Layer2 delete all and creat a PTM interface with default seting

• In the WAN Service Configuration page

•Select WAN Service type: Bridging

• 802.1P Priority [0-7]: 1

• 802.1Q VLAN ID [0-4094]: 35

Vlan8021p VlanMuxId

1                  35

 

 

 
Was this article helpful? yes / no
Related articles Provisioning a Remote Extension with 3CX Phone System
K2 Telecom user call forward *72
Article details
Article ID: 160
Category: Voip, Telephony, K2 MyPBX
Date added: 2017-06-17 17:19:10
Views: 327
Rating (Votes): Article rated 4.0/5.0 (4)

 
« Go back

 
Powered by Help Desk Software HESK, in partnership with SysAid Technologies